Car Electric Air Pump Digital Tire Inflator LED Lamp 12V Portable Air Compressor for Car Motorcycle Bicycle Ball

Description

Product name: vehicle air charging pump
Product model: Digital display model
Product size: about 20*9*14cm
Product material: ABS
Product weight: Gross weight (approximately) 860G
Power cord length: about 300cm
Tracheal length: about 50cm
Product packaging: 250x125x177mm
Output power: 120W
Rated voltage: DC12V
Headlight: LED

Product characteristics

1, This machine applies for 12V automobile tires,
2, Also applicable to motorcycles, bicycles, balls, rubber boats, floating beach beds, inflatable toys, etc.
3. On the road, in the field or in the morning, the tire has a sudden leak or the tire injection, you can perform first aid.
4. The car tire to maintain the correct tire pressure, can ensure driving safety and save gasoline, with the car, in case of endless wonderful use.
5, equipped with a complete set of inflatable mouth, can be used to give tires, rubber boats, air mattresses, inflatable toys, balls and a variety of other uses.

Instructions for use:

1. Put the air nozzle on the head of the rubber tube directly on the tire valve. When air leaks from the tire, the air has circulated. Continue to tighten the nozzle and air will not leak.
2. Insert into DC12V cigarette lighter
3. When inflated, the instrument pointer rises with the saturation degree of the tire. When the pointer reaches the proper tire pressure (general car tire pressure is 223 kPa = 35 PSI), take out the plug and air nozzle to complete the work.
4. Use the professional ball pin and plastic receiver connected with the air nozzle to inflate the ball type and other gas demand equipment.

Issues need attention:

1, It cannot be used in inflating tires of large and overweight vehicles, such as trucks, large trucks, box-type set cargo, etc.
2. When using it, turn on the car engine to improve the power, do not consume the car battery power;
3, the machine is limited to the use of DC power supply (DC12V), do not use high voltage AC power supply (AC220V);
4. When inflatable, stop for 10 minutes after 10 minutes of continuous work to avoid damage to the air pump and accessories and prolong the life of the motor. When the rubber boat is inflated, it can work continuously for 30 minutes;
5. Generally, the tire can reach 30 PSI, and the large tire will take longer time. If the instrument pointer rises quickly to 50-100 PSI, the air is blocked without entering the tire, please remove the air nozzle gasket and restart it, otherwise the motor and instrument are easily damaged.
6. Use people who do not abandon the body, pay attention to the tire pressure at any time, do not be too saturated;
7. After using this machine, the collet wrench should be straight to avoid fatigue of the elasticity of the rubber;
8. The air pump plug is equipped with a fuse. If the air pump does not start, open the plug to check and replace (the fuse is 10A);
9, the machine should avoid moisture, heavy falls and sand intrusion, prevent children from playing, to avoid damage;
10. The pressure required for each tire is different. Please check the marking on the side of the car tire.