Watch Repair Kit,Professional Watch Battery Replacement Tool,Watch Link & Back Removal Tool,Spring Bar Tool Set with Carrying Case

Wide Applicability : The professional watch repair kit is very suitable for repairing and adjusting the watch, such as disassembling the strap,
opening the back cover of the watch, replacing the clock battery, replacing the strap, adjusting the strap, cleaning the inside of the watch,
maintaining the inside of the watch, etc.

High-quality professional tools : High-quality professional tool kit-watch chain link removal kit is made of steel, sturdy and durable, and
can be used for various functions such as removal and installation when repairing various watches. The brown cover at one end of the
screwdriver can be opened, and the inside is hollow to store the screwdriver bit.

Easy to Store and Carry : The watch repair kit is a zipper design, has a small size, and a drawstring design is easy to store and easy to clean,
and can be carried out anywhere. It is an ideal choice for professionals or families.

Diversity of Choice : Two kinds of repair tools after the watch, manual and semi-automatic, you can choose the tool you like to repair, and
enjoy the fun and experience of two different repair methods.

Two Ways to Easily Adjust the Strap Length
plan A : Link Pin Remover
1. Place the watch band on the circular platform and adjust the platform height by turning the knob. Ensure that the pin is at the same
    height as the pinhole of the watch band.
2. Turn the knob to push the link out of the hole.

plan B : Small Hammer+Pin Punches + Watch Brand Holder
1. Place the watch band on the watch brand holder.
2. Aim the Pin Punches at the hole in the watch band and use a small hammer to hammer it gently.
Note: Please remove the link pin in the direction indicated by the arrow on the strap.

Verify The Case Type of Your Watch And Select the Correct Case Opener
Screw in case opening method:

1. Select a suitable size pin and install it on the adjustable case opener. Hold the back of watch facing up and secure it to the bracket of
    the back case.
2. Turn the central wheel of the adjustable case opener. When the pin is aligned with the groove on the back of the watch, turn the case
    openner to open.

Press type watchcase open method:
1. Place the back side of the watch upwards and secure it to the rear cover tray. Hold the pry openner with the other hand.
2. Carefully insert the blade into the pry hole on the back cover of the watch, and gently pry up the back cover.

Easy Change of Watchband in 4 Steps
1.The point of the spring bar(o-tip) into the band pin and push out the pin.
2.Align the spring bar tool(v-tip) with the spring pin and gently press it to remove it.
3.Measure the length of the spring pin with a graduated spring pin.
4.Select a proper length of spring pin to connect to the watch band.