Wireless L/R Joypad Controller for Switch/Switch OLED Controller

When the host is powered off, press the Pair button for 3 seconds to pair the host. Press the Home/Capture button to connect back.
Operation method and LED indication:

Wireless mode:

1. When the slider is plugged in, it can be used. When the slider is pulled out, it will automatically connect to the host via Bluetooth

2. In the shutdown state, press the Pair key for 3 seconds to pair pairs. Press the Home/Capture button to connect back

3. Other items are consistent with the original handle

Usage of the T (TURBO) key

1. Press the key Turbo+a (click) to implement the function of continuous transmission of A without holding down the key a automatically continuous transmission (vibration indicates successful setting). Second, Turbo+a (double click) needs to press a for continuous sending (vibration prompt setting is successful). Third, long press Turbo (5 seconds) to cancel the continuous sending function, or press Turbo+a to cancel the continuous sending function (vibration prompt).

2, T key gear adjustment function, 5shoots/s, 12shoots/s, 20shoots/s

#1 "T" + "-" Reduces the TURBO speed

#2 "T" + "+" Increases the TURBO speed

Motor regulation:

Function is divided into 5 levels: 100%, 75%, 50%, 30%, off. (Default is 50%)

#1 "T" + "on Rocker" to increase motor motion

#2 "T" + "Under Rocker" to reduce motor motion

#3 After successful adjustment, the motor will vibrate for 0.5 seconds

Charge:

Shutdown charging led4 lights slow flash full led the fourth light long light

A set of standard accessories: left and right joy-con handle + data cable + manual + color box